Friday, October 16, 2009
Got Clamps?
There seems to be a long stretch between the beginning of a project and the time you start to glue parts of it up. Then, it seems to be an even longer stretch to work out the details and go through the finishing process. Admittedly, my finish is pretty labor intensive but well worth it in my opinion -- never had a client complain! Anyway, here's a shot of the pistol case glued together and clamped, I guess it's true that you can't have too many of them! I don't know about other woodworkers but the time you begin to assemble your work is always somewhat stressful for me. Each one of the fingers needed to have a thin coat of glue brushed on them and everything has to be done quickly, especially in our dry, desert climate. During the summer I won't even think about gluing a complicated project together. Lucky if it's below 85 degrees at 6 am, no problems today though.
Fitting the top and bottom.
Progress on the gun case is going well! Much of it now is the quiet handwork that is really enjoyable to me. The way the case will be built is to assemble it as a closed box and then cut the top and bottom section apart. Because of its size (approximately 11" x 25") the top and bottom pieces have to float and have enough room for the inevitiable expansion and contraction of the wood. That's something you always need to do when building with panel and frame construction. Failure to do that will probably result in a cracked panel or case. Sorry about the distortion of this picture but you can see the rabbet which was rough cut with a router bit and then fine tuned with my shoulder plane visible at the top of the bench. Next was to cut a slight radius around the edge of the panel, this was accomplished with the block plane. Finally, the board was finished off with a #4 Smooth Plane as the final step. There's always something special to me about the way shavings come off of a well sharpened plane, you can see them in the picture. Both pieces will be finished with Watco Danish Oil before the case is assembled, that's the best way to avoid having an unfinished edge as the panel contracts or expands. Looking forward to assembling the case tomorrow.
Tuesday, October 13, 2009
Finger Joints and Stopped Dados
This is one of those times when it is very easy to ruin all the work so far! The way I've designed this case is to have a floating panel for the top and bottom. Originally I had planned to resaw some 8/4 stock and book match these but since I was able to find a wide piece that wasn't needed. The top/bottom will be 5/8" thick and positioned slightly below the edges. With finger joints you can cut your dado through the open finger on one board but the other one needs to be stopped and cut into the finger itself. Time for patience and sharp chisels! You can see in the photo how the dado goes about 1/4" into the finger. Always a danger of splitting when you cut with the grain but even if it does, if you're careful not to let it split out, when the box is assembled the glue will hold all of it together. This box will be glued together completely and then the top will then be separated from the bottom.
Been Busy!
I've had to take a break from the gun case and concentrate time on our backyard re-do. Layed the sod today and all that remains is the new light and putting bricks part way up the columns. The other thing that's kept me occupied is finishing the 6 dining chairs to go with the table I made earlier. I've attached a picture of the oak prototype which has a laminated back made of Canarywood. This chair is for sale for $100.00, that's a bargain because the final ones will be four to five times that amount.
Wednesday, October 7, 2009
Barrel Support Insert
In my research I learned that the pistol or gun should have about half of it proud of the piece it's inserted into. Since the pistol will be supported by a 1" thick layer of upholstery foam covered with leather beneath the board it's inserted into, the barrel would be way to low once the pistol is strapped down. To solve that problem I decided to mortise in a piece of mahogany to support the end of the barrel. I could have used a router but prefer hand tools when ever possible. Something about the quiet process of using a mallet, chisel, and my router plane that soothes the soul and makes me feel as if I'm really connecting to the work. What you're looking at in the photo is the bottom of the board.
Saturday, October 3, 2009
Pistol Case Template
The first step for this particular project was to make a template of the pistol and the powder horn. I suppose I could have done this on the project itself but since there is the possibility of two more boxes this seems like the wise thing to do. This is simply on a piece of 1/4" MDF which I'll use to transfer to the mahogany.
Since the case I'm making will be a contemporary example instead of an authentic reproduction I've made some changes. First of all, the pistol and powder horn will be secured with a leather strap and snaps. This way they won't be able to move around as it's being carried from one place to the next. I used an article from an old Fine Woodworking magazine as a source and it suggested using leather placed over 1" upholstery foam. Leather will stand up better than felt to gun powder and oil. It'll also be constructed in such a way that it can be disassembled and replaced if needed. I'll share the details as the box is built. Pretty straight forward process so far. I used a scroll saw to cut out the template and then filed and sanded to get it to fit the piece.There will be compartments on the right side of the case to hold the cleaning equipment, balls, powder, and wads. I've neglected to tell you what type of pistol this is, it's a .44 caliber, 1860 Army Revolver.
I've also been making an improved version of a finger joint jig. It was designed by Nick Engler and was in Popular Woodworking, June 2001. What I found ingenious about this jig is that he used a #10-32 x 2" long, flathead machine screw for the fine adjustments. Since there are 32 threads per inch, each complete turn of the screw will move the jig 1/32" -- one of those simple yet brilliant things where you scratch your head and say "why didn't I think of that?" I'll take a photo of it when I get to cutting the finger joints on the project.
Since the case I'm making will be a contemporary example instead of an authentic reproduction I've made some changes. First of all, the pistol and powder horn will be secured with a leather strap and snaps. This way they won't be able to move around as it's being carried from one place to the next. I used an article from an old Fine Woodworking magazine as a source and it suggested using leather placed over 1" upholstery foam. Leather will stand up better than felt to gun powder and oil. It'll also be constructed in such a way that it can be disassembled and replaced if needed. I'll share the details as the box is built. Pretty straight forward process so far. I used a scroll saw to cut out the template and then filed and sanded to get it to fit the piece.There will be compartments on the right side of the case to hold the cleaning equipment, balls, powder, and wads. I've neglected to tell you what type of pistol this is, it's a .44 caliber, 1860 Army Revolver.
I've also been making an improved version of a finger joint jig. It was designed by Nick Engler and was in Popular Woodworking, June 2001. What I found ingenious about this jig is that he used a #10-32 x 2" long, flathead machine screw for the fine adjustments. Since there are 32 threads per inch, each complete turn of the screw will move the jig 1/32" -- one of those simple yet brilliant things where you scratch your head and say "why didn't I think of that?" I'll take a photo of it when I get to cutting the finger joints on the project.
Thursday, October 1, 2009
Experiment
Since I'm new to this blogging thing, I'd like to do an experiment to see if I can make a link to my wife's site. She's a very talented artist and represented by a gallery in Naples, Florida and Calistoga, California. She's the one who's inspired me to do picture framing and I've gone from very basic wooden frames to carved and gilded ones. To view her work,just follow this link.
Subscribe to:
Posts (Atom)






