I've been asked to show the inside of the shelf, this is the best shot I could get of how I staggered the shelving. The cleats that are screwed to the wall are spaced at 16", I knew I wasn't going to spend a ton of money for the brackets so by running the shelves the full length of the wall they weren't needed. You may be able to see the cleats that I used to support the back of the shelf as well. I even have a light mounted inside now, I needed a place to put my work lamp other than hanging from the garage door hardware so I could always bump my head on it. I hung it on the ceiling rafter and let the plug out of the ventilation space at the back of the shed. You can't see it but should I need light all I have to do is run an extension cord.
On another, positive note I spoke with the man who commissioned me to make the first pistol cases. The first one was given to his son as he returned from Afghanistan. There was also a promotion ceremony so many of the 101st. Airborne were present. From what I was told, the pistol case was very well received and admired and many wanted to have a similar case for their own pistols. Could definitely create that niche market that we, as woodworkers, are looking for. I'll keep you posted, I meet with him tomorrow to deliver the two I just completed and hopefully get a commission for another!
Wednesday, December 16, 2009
Tuesday, December 15, 2009
As promised - Finished Shed
Well, here it is the final work is done and the shed has been complete. I must admit that I'm quite pleased with it. Although the footprint is only 4'x8' and the 3 1/2" thickness of the walls reduced that it will be very functional. Our biggest concern is that we didn't want it to look like an out building on a ramshackle farm! I won't bore you with any interior pictures but there are 4 sets of 12" wire shelving on the back wall, ditto that on the wall closest to the door and the opposite wall has 16" wide shelves. They're staggered in the corners so they run the full length and width of the shed. Plenty of room for "stuff" as well as jigs I use for my woodworking. Diane is helping me design a new business card to showcase the pistol cases. There is a gun show this weekend at Cashman Field and the plan is to go there, strike up a conversation or two, and try to drum up some business. The pistol cases may be a good item, even in this economy ---- wish me luck!
Saturday, December 12, 2009
Staying warm by Planing !
This is one of the pieces for the door I'm making for the shed. It's been pretty rainy and cold, at least for Las Vegas standards, so jointing the edge with my No. 7 corrugated Stanley Plane not only gave me a smooth edge, it also kept me warm! The door was made using the textured piece of OSB that covers the shed and some 6/4 Poplar. Decided to make it with 1 1/2" long, 3/8" tenons. One of the pieces has a bit of a crook to it but it looks as if it'll hold okay since that's the side I put the hinges on. Used Gorilla glue to help withstand the elements. At this point, the rain has kept me from doing too much outside but the roof doesn't leak. Early this morning I managed to paint the door frame and molding around it by making a makeshift roof out of a plastic tarp. I wanted to get the first coat of paint on it before the predicted rains for this afternoon. According to the latest weather report the rain should taper off during the day Sunday so hopefully I'll be able to get everything done. I've completed the other two pistol cases and now I'm waiting for a break in the weather so I can photograph them. I'll definitely put them on the blog when that's done. I keep thinking that they may be a good niche market for me.
Saturday, December 5, 2009
Need a fancy name for "Shed"
The shed has taken quite a long while to do. Although it's fairly small (4' x8') working alone takes extra steps. I got some help from Richard to bring the foundation and floor out of the garage and then in position. Used a textured, pre-primed siding with 8" o.c. resawn board effect. Boy, that textured material is a chore to paint! Painted everything prior to installation then gave it all a second coat after setting the nails. As luck would have it, I needed about one and a half bundles of shingles. Sometimes I think a small project like this takes more time, seems as if I'm always either bumping into things or moving them to make room. It's going to be worth the effort though if I can get things out of my shop area and into it. Doing all of the shelves inside from the metal type used in closets that I found on Craig's list, used a combination of 12" and 16" and it makes it seem as if there's more room inside. Last thing for next week is to make the door from 6/4 poplar. It'll be panel and frame with deep mortises to withstand the weather. We know it's a shed but to call it that makes it sound like %$*(#, how about storage cabiniste, you know, give it that sophisticated sound like Target. Maybe I'll post a picture when the door is done, supposed to have a chance of rain/snow flurries Monday so glad the roof is up.
Friday, November 27, 2009
Foundation
Well, decided that I really need to construct a shed because every time I move in the shop I either seem to run into something or else have to move "stuff". At the side of the house I can construct a 4' x 8' shed. In Craig's List I found a good deal on some wire metal shelving so I picked that up on Wednesday. Went to Home Depot today and got the material for the foundation and walls. There is a concrete slab so the plan is to put the shed on that, next to the house. Since the slab is sloped away from the house I needed to taper my 2x4 pressure treated lumber by a 1/2" in the 4' direction. This was done with the bandsaw but all the pieces weren't perfectly level.
How else would a furniture maker them that way?; why with a plane -- of course! I clamped the pieces together and went to work. What a difference planing green, pressure treated Douglas Fir as opposed to the mahogany I've been working with for the pistol cases. Richard, my neighbor, helped me move the foundation outside. To make it easier I assembled the framework in the shop. As always, I probably went over-kill on it as I pre-drilled and then screwed it all together with deck screws. Tomorrow I'll start the framing the walls and attaching the subfloor.
How else would a furniture maker them that way?; why with a plane -- of course! I clamped the pieces together and went to work. What a difference planing green, pressure treated Douglas Fir as opposed to the mahogany I've been working with for the pistol cases. Richard, my neighbor, helped me move the foundation outside. To make it easier I assembled the framework in the shop. As always, I probably went over-kill on it as I pre-drilled and then screwed it all together with deck screws. Tomorrow I'll start the framing the walls and attaching the subfloor.
Thursday, November 26, 2009
Gimlets Anyone? And I don't mean with Vodka!
As I've said before, in my woodworking I enjoy using hand tools even if a powered one can perform the task quicker. Don't get me wrong, I'll use power tools but sometimes there is a definite advantage to going with the hand tool way. You've probably been receiving Christmas catalogs from tool suppliers and maybe you've noticed that several of them offer sets of gimlets like the ones shown in my photograph. In the course of making the pistol cases I've been using hardware that has screws as small as a #2. Drilling a pilot hole for something that small can be dangerous! You have a large, powered drill turning a tiny bit of hardened steel into the wood. Any slight twist or angle change can easily break the bit -- don't ask me how I know that one! With a gimlet you have much more control. If you've never used one the trick that I find works for me is be sure you're putting good pressure into the wood when you initially start the hole. Once it starts it screws itself in nicely. What I do is use a single edge razor blade as a scraper to smooth out the edge of the hole if necessary. Then take the usual precautions that you'd use with tiny, brass screws which for me is using bee's wax as a lubricant. Another way you can use with brass screws is to first use a steel screw to create the hole and then remove it and replace it with the brass. Using a gimlet eliminates that step so they are a win/win option for using small brass screws.
The two pistol cases I'm working on are just about finished. All that's left is to attach the snaps to the straps, two more coats of finish on the exterior, final assembly, and putting on all of the hardware. I think my next project will be constructing a shed in the side yard, my shop seems to be getting smaller!
The two pistol cases I'm working on are just about finished. All that's left is to attach the snaps to the straps, two more coats of finish on the exterior, final assembly, and putting on all of the hardware. I think my next project will be constructing a shed in the side yard, my shop seems to be getting smaller!
Monday, November 16, 2009
A Better Mousetrap?
When I built the original pistol case I knew that being accurate on the finger joints was important. I thought that I had discovered a good jig on the web but after building it and trying to make it work found it just wasn't so! The jig here came from a publication from ShopNotes called: Table Saw, best tips, tools, and techniques. What made it a better jig is that the two sides ride in the miter gauge slots and have 2 pieces of 3/4" ply keeping them square. The only negative I had is that it wanted to tip forward when cutting fingers on a long board but that was easy enough to overcome by placing my forearm on the rear portion of the jig. It has a jig fence and what I'd call the finger fence. You need to make this "finger fence" for each size of finger joint you plan to make, I only made this for the 3/8" size I'm using on the pistol cases. A really nice feature is the that board you're cutting rides on a 1/4" piece of mdf, this prevents it from moving up/down in case your blade insert isn't perfectly flush with the table. There's also a sacrificial piece of mdf on the back to help prevent tear out. The adjustment comes from having a larger hole on the part that slides in the miter slots than the carriage that goes through the finger fence. In my case, I had a 3/8" bolt so I used a 1/2" hole in the rear fence. The adjustment is done through the piece on the end with the three holes in it. This is attached to the rear fence, the single hole at the front is so that you can place a screwdriver in it to adjust the position. I put a tee nut there (10/32) and used a cabinet handle screw to accomplish this. Once you've dialed in the cut simply tighten the wing nuts on the back of the jig.
One last thing I'd like to share, if you've ever made a finger jointed box with a panel floating in a dado/groove you know you can't cut that dado all the way through the finger. What's required is some chisel work to stop the cut. I used my test pieces from setting up the finger joints to support the sides of the piece as I cut the stopped dado. Of course, you could also use your router to cut that and not have much to square off but who wants to take the time to set that all up and then listen to the racket! I used a dado blade in the saw and needed to square off the ends of the dado.
One last thing I'd like to share, if you've ever made a finger jointed box with a panel floating in a dado/groove you know you can't cut that dado all the way through the finger. What's required is some chisel work to stop the cut. I used my test pieces from setting up the finger joints to support the sides of the piece as I cut the stopped dado. Of course, you could also use your router to cut that and not have much to square off but who wants to take the time to set that all up and then listen to the racket! I used a dado blade in the saw and needed to square off the ends of the dado.
Subscribe to:
Posts (Atom)





