Friday, November 13, 2009

What's Happening Now?

This weekend we have a wedding coming up and it's pretty exciting to say the least!  The progress on the two pistol cases is going well.  Currently I'm working on what's probably the most time consuming part of it (other than finishing) and that's making the panel that the pistol and powder horn are inserted in to.  The first  step is to cut them out on the scroll saw which doesn't leave a real good square or smooth opening.  I've learned that it's actually easier and better to fine tune the openings with a chisel rather than files or rasps.  This is especially true with the end grain -- a sharp chisel will shave cut that smoothly, almost like cutting dovetails.  Both inserts are ready and the next phase will be to cut a mortise in the back to make the barrel rest for the pistol.

Wednesday, November 11, 2009


 Just wanted to share a photo of the dining chairs I've been working on and have mentioned in the past.  They're my original design and I refer to them as my Dovetail Chair.  Very difficult to photograph without a lot of distortion but the front stretcher is dovetailed into the leg.  This is a technique I tried on a bench out in the garden several years ago and it's still holding together.  The wood used is Canarywood and there are ebony plugs on the laminated back and also to wedge the tenons for the back stretcher.  There are six chairs to this set and they go with the table I made earlier.
As for the pistol cases I received a great compliment -- he ordered 2 more that are identical for Christmas presents and told me he had a gun for himself that he wants me to design a different case for.  He also thought that I'd copied the design for the case from one he had seen at the Smithsonian Museum, pretty good company to be included with!
Work has started on the two cases, I found some African Mahogany that has some pretty distinct, ribbon grain.  Reminds me of a chocolate ribbon cake -- I'll post some pictures soon.

Sunday, November 1, 2009

Pistol Case Completed












After a good 30 hours of work the pistol case is now ready to be delivered to my client.  All it's lacking is an engraved nameplate for his son that he had me make this case for.  I'm quite pleased with the final product.  I believe it achieves everything it was supposed to.  It's a good looking example of woodworking, it holds the pistol and the items needed for it, and last of all it's a safe and attractive way to transport the pistol.  The approximate dimensions of it are 5" tall by 11" wide and 26" long.
The pictures below shows how the pistol fits into the case along with the powder horn.  I decided to use a latch to close the storage compartment.  It's lined with leather and will hold the balls, caps, and wads.
 


















I hope readers of this blog have enjoyed seeing the process as much as I've enjoyed creating this case.  If anyone is interested in any details of the construction or would just like to comment on this piece please feel free to do so.  The next item I plan on putting on my blog are the dining chairs I recently completed.  I'm going to challenge myself in another way by trying to use my new MacBook computer instead of the PC I've been using now.  Bear with me though, I seem to be pretty slow when it comes to learning new computer oriented stuff!

Thursday, October 29, 2009

Phillips Head vs. Straight Slot!

Just a quick entry about today's progress on the pistol case.  It's complete except for the leather straps that will hold the pistol in, I'll cut those and dye them tonight.  As "modern" woodworkers we tend to forget some of the advances we enjoy due to different ways to make common, every day things like screws.  To maintain the era of the case I knew I wanted to use slotted screws rather than phillips.  Using them I realized how much easier it is to drive a screw with a phillips or square head.  Some of the hardware I used required a #2 x 5/8" flathead, slotted screw.  Yes, I did break my tiny drill bit in one of the holes!  Even following the most prudent practices of first using a steel screw to pre-size the hole and waxing the brass screws before putting them in, it was a very time consuming process.  Luckily, all went well.  I'll post some pictures of the finished box soon.

Tuesday, October 27, 2009

Back in the Shop

Last weekend we were in Denver for the opening of an art show that Diane was accepted in.  It was at Saks Gallery and the opening was very well attended.  I'd estimate at least 200 people and although there  weren't a lot of red dots (indicating a sold painting) it was good to see so many folks out looking.  When we left Sunday evening it was just starting to snow!  If you're ever in Denver I can't recommend going to their art museum enough -- 6 floors, 2 buildings and just fantastic.
Back to work on the pistol case and today I applied the first of 4 final coats to the exterior.  This is a 3-part mixture I use that is wet sanded into the wood.  I start with 400 grit, then 600, and the final coats are applied with denim.  It's a formula similar to what George Maloof uses but I learned about it from Art Espinoza Carpenter back in the early 70's.  The main difference is that it uses boiled linseed oil where Maloof uses tung oil.  Been using it for years and I've never had a complaint about it.  The interior will be waxed only using Liberon Black Bison wax.  Some clients object to the turpentine smell of the three part mix.  Tomorrow will see another coat on the exterior and I need to dye the leather for the straps.

Thursday, October 22, 2009

Parts is Parts!


Most of you will probably remember that line from a chicken commercial a number of years ago.  Finally, here are the parts of the pistol case all laid out and ready for the first coat of Watco oil.  You'll notice that the panels for the top and bottom have already been finished which is what you should always do on panel and frame construction.  Should the panel shrink (as wood tends to do) you won't have a line unfinished wood showing at the edge.  Looks kind of like a jig saw puzzle doesn't it? Let me talk you through what you're seeing; the top and bottom of the box are pretty obvious.  At the sides, the long pieces are the dust check for the long edge of the box, the end pieces are laid out at the top.  The piece that looks white is the bottom of the "sandwich" I talked about in the last blog, that's where the foam and leather go.  Then the piece that has the pistol and powder horn cut out on it gets screwed from the bottom to complete that sandwhich.  The sandwich is placed in the box, the partitions are put down, the dust checks are screwed to the sides and you're almost done!  All that remains is to dye the leather for the straps that will hold things in place and screw the hinges on for the door that will cover the paraphernalia for the pistol.  Attach and fit the hinges, handle, and clasps and it's ready to be delivered.
I've been asked how long this project has taken so far, usually you don't want to know that but I keep track of these things anyway.  There is close to 22 actual work hours into this piece so far.  There is the final, hand rubbed coats for the exterior and wax only for the interior.  Lots of careful fitting, planing, chiseling, etc. -- the kind of work that machines can only replicate on the assemble line.  To me, theirs no satisfaction in that!

Wednesday, October 21, 2009

Construction Details


As with all projects a lot of thinking and planning goes into them to make it all come together.  The problem here was to assemble the interior of the case in such a way that it could be dissassembled in case the leather or foam needs to be replaced, those are the only things that could wear out.  I've posted a sketch to help you see how I solved this dilemma.  First off, the case is finger jointed and the bottom and top panels float in rabbets.  I decided that the best thing to do was create a "sandwich" with a 1/4" piece of Baltic Birch plywood on the bottom.  A 3/4" spacer was attached to that around its perimeter.  Next is the fitted piece that holds the pistol and powder horn in place.  In between them is a 1" thick piece of upholstery foam covered with my leather.  When these pieces are screwed together the foam/leather pushes up into the cut outs for the two pieces.  Once I assemble all of this I will use leather straps to hold them down into the foam.  The dust check is screwed to the sides of the case to hold the insert in.  Should the foam or leather ever need to be replaced it'll just be a matter of unscrewing the dust check and taking it apart. I've also made 4 compartments to store the cleaning equipment and the balls, wads, and caps.  I spent the better part of today assembling this and it all works.